产养殖微纳米曝气机工作原理

Working principle of micro nano aerator for aquaculture

微纳米曝气机由主机、溶气系统、释放系统等组成。RWP微纳米曝气机通过主机泵将气体和水混合后输入到溶气罐,使气体溶解在水中,继而通过释气装置将溶解气体释放出来形成微纳米气泡,并以高速射流到水中,实现水质的净化。微纳米气泡在水中的溶解率超过85%,溶解氧浓度可以达到饱和浓度以上,并目微纳米气泡是以气泡的方式长时间存留在水中,可以跟随着水流的方向全方面增氧，也可以随着溶解氧的消耗不断地向水中补充活性氧,让水体不缺氧，为净化处理污水的微生物提供了充足的活性氧、强氧化性离了团,并保证了活性氧充足的反应时间。经过RWP系列微纳米曝气机处理后还原的洁净水,水中的溶解氧含量标准为4ppm（4毫克）,水自身的净化能力远远高于自然条件下的自净能力。

Micro nano aerator is composed of main machine, dissolved air system, release system, etc. The RWP micro nano aerator mixes the gas and water through the main pump and inputs them into the air dissolving tank to dissolve the gas in the water. Then, the dissolved gas is released through the gas releasing device to form micro nano bubbles, which are injected into the water with high-speed jet to realize the purification of water quality. The dissolution rate of micro / nano bubbles in water exceeds 85%, and the dissolved oxygen concentration can reach above the saturation concentration. The micro / nano bubbles are kept in the water for a long time in the form of bubbles, which can increase oxygen in all aspects with the direction of the water flow. They can also continuously supplement active oxygen to the water with the consumption of dissolved oxygen, so that the water body is not anoxic, providing sufficient active oxygen and strong oxidizing dissociation for microorganisms purifying and treating sewage, The reaction time of active oxygen is sufficient. The dissolved oxygen content of the reduced clean water treated by RWP series micro nano aerators is 4ppm (4mg), and the purification capacity of the water itself is much higher than that under natural conditions.

水产养殖微纳米曝气机安装注意事项：

Precautions for installation of aquaculture micro nano aerator:

微纳米曝气机的特点就是在安装的时候非常的方便，根据图纸的要求非常简明、易懂，不需要安装的基础，电源线的安装需要的电工来进行。

The feature of micro nano aerator is that it is very convenient to install. According to the requirements of the drawings, it is very concise and easy to understand. There is no need to install the foundation. The installation of power lines requires professional electricians.

水底的距离跟电机在水表面上工作的区域水深不得少于1.5米

The distance between the underwater bottom and the water depth of the area where the motor works on the water surface shall not be less than 1.5m

微纳米曝气机安装说明书的要求安装在水底或岸边，在对称位置用膨胀钉设置两个适宜的固定点用拉索固定，拉锁的另一端头连接在纳米气泡机的浮筒上将机器安放在水体的合适位置将拉索固定即可。

The micro nano aerator shall be installed at the bottom of the water or on the bank according to the requirements of the installation instructions. Two suitable fixing points shall be set at the symmetrical position with expansion nails and fixed with cables. The other end of the latch shall be connected to the pontoon of the nano aerator. The machine shall be placed at a suitable position in the water body to fix the cables.

电源线选择可移动的橡套防水电缆，其中一芯与电机外壳可靠接地。

The movable rubber sheathed waterproof cable shall be selected as the power line, and one core shall be reliably grounded with the motor shell.

安装深度不可随意调节。

The installation depth cannot be adjusted at will.

安装完之后要检测电机的运转方向是否正确，如果是反方向，请及时改正。

After installation, check whether the running direction of the motor is correct. If it is in the opposite direction, please correct it in time.

工作池内不得出现金属线、绳子等易缠绕的杂质

There shall be no metal wire, rope and other impurities that are easily entangled in the working pool

微纳米曝气机在出厂时有专门的电器控制系统

The micro nano aerator has a special electrical control system when it leaves the factory

本文的精彩内容由湖北水产增氧设备提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.sddyfd.com/我们有专门的客服为您解答问题

The wonderful content of this article is provided by Hubei aquatic oxygenation equipment. There are many wonderful content on this website. You can click to enter more content: http://www.sddyfd.com// We have special customer service to answer your questions