小编给大家介绍一下详细解说回转式鼓风机的性能结构!
Xiaobian will introduce to you a detailed explanation of the performance structure of the rotary blower!
回转式鼓风机效率高,功耗低。风扇转子采用特殊设计,啮合曲线是的复合型线,密封,泄漏少,容积效率进一步提高。开始使用时,要注意材料流的情况,调整板,调整材料流通过的截面的大小,从而实现材料流速度的控制。
The rotary blower has high efficiency and low power consumption. The fan rotor adopts a special design, and the meshing curve is an advanced composite line, which is sealed, has less leakage, and the volumetric efficiency is further improved. At the beginning of use, pay attention to the material flow, adjust the plate, and adjust the size of the section through which the material flow passes, so as to realize the control of the material flow speed.
回转式鼓风机的配套电机容量选择较大。
The supporting motor capacity of the rotary blower is relatively large.
回转式风扇噪音低的风扇的进排气口采用螺旋结构,使风扇的进排气随着转子的回转而逐渐进行,避免了旧式风扇瞬间开闭带来的脉动和噪音,回转式风扇运转平稳,噪音低的风扇产品组的消音器在前面
The intake and exhaust ports of the low-noise fan of the rotary fan adopt a spiral structure, so that the intake and exhaust of the fan gradually proceed with the rotation of the rotor, avoiding the pulsation and noise caused by the instantaneous opening and closing of the old fan. The rotary fan operates smoothly, and the silencer of the low-noise fan product group is in front
回转式鼓风机运转平稳,没有振动。公司采用的叶轮加工专用加工中心,在使转子啮合间隙均匀,形成平衡状态的基础上,风扇转子经过更精密的动平衡实验,几乎不使风扇运转振动。回转式鼓风机安装前需要检查通风层是否破损或被雨水浸泡等现象。存在时,请不要造成串风或堵塞。风扇离溢流式减震器很远时,请务必支撑连接管道,以免产生振动。以上是回转式鼓风机性能结构的知识。看到这个,我相信大家对回转式鼓风机更了解。
The rotary blower operates smoothly without vibration. The company adopts an advanced special machining center for impeller processing. On the basis of making the meshing clearance of the rotor uniform and forming a balanced state, the fan rotor has undergone more precise dynamic balance experiments, which hardly makes the fan run and vibrate. Before installing the rotary blower, it is necessary to check whether the ventilation layer is damaged or soaked by rain. When it exists, please do not cause cross ventilation or blockage. When the fan is far away from the overflow shock absorber, be sure to support the connecting pipe to avoid vibration. The above is the knowledge of the performance structure of the rotary blower. Seeing this, I believe you have a better understanding of the rotary blower.
The above is a detailed introduction about Hunan low noise rotary fan. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sddyfd.com/