The function and operation process of the gasification fan and electric heating of the material seal pump of the pneumatic conveying equipment: first, check the gasification fan and electric heater, connect the power supply, check whether the switch position of the fan pipe contact door is correct, open the fan outlet door, start the gasification fan, and open the corresponding electric heating outlet door. When the pressure of material seal pump of pneumatic conveying equipment is low, increase the air supply pressure and open all air supply valves; Repair and check the pressure gauge; Check the wiring.

检查气化风机和气力输送设备料封泵电机的地脚螺栓是否松动，皮带罩是否牢固。看电机接线是否正确，接地线是否良好。气化空气油位应正常，冷却水应畅通。皮带应适度拉紧，风扇入口处的空气过滤器不应堵塞。运行前检查气化风机和电加热控制箱上的电源指示灯亮，电压表指示正常。电加热器外壳应完整，电源和接地线完好。检验合格后，可在气力输送设备料封泵的上位机上投入运行。

Check whether the anchor bolts of the gasification fan and the material seal pump motor of the pneumatic conveying equipment are loose and whether the belt safety cover is firm. Check whether the motor wiring is correct and whether the grounding wire is good. The oil level of gasification air should be normal, and the cooling water should be unblocked. The belt should be properly tightened, and the air filter at the inlet of the fan should not be blocked. Before operation, check that the power indicator on the gasification fan and electric heating control box is on, and the voltmeter indication is normal. The shell of electric heater shall be complete, and the power supply and grounding wire shall be intact. After passing the inspection, it can be put into operation on the upper computer of the material seal pump of the pneumatic conveying equipment.

以上就是为大家介绍的有广西气力输送方案设计的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddyfd.com/

The above is a detailed introduction to the design of Guangxi pneumatic conveying scheme. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.sddyfd.com/