罗茨鼓风机在启动开机前应做好几项准备工作,小编在下面的文章中就给您介绍一下应做好哪些准备工作:
Before starting Roots blower, several preparations should be made. The following article will introduce what preparations should be made:
1、清理干净周围杂物,保持风机两米范围内无杂物;
1. Clean up the sundries around and keep no sundries within two meters of the fan;
2、检查电气部分以及降压启动设备是否完好;
2. Check whether electrical parts and step-down starting equipment are in good condition;
3、检查检修工具是否齐备,消防灭火器材是否充足完备。
3. Check whether the maintenance tools are complete and whether the fire fighting equipment are sufficient and complete.
4、完全打开进气调节阀,出气调节阀以及旁通管;
4. Fully open the inlet control valve, outlet control valve and bypass pipe;
5、检查进风口空气滤清器是否通畅,滤清器是否完全打开;
5. Check whether the air inlet filter is unobstructed and whether the filter is fully opened;
6、检查管道、阀门、消声器、空气滤清器支撑是否稳固,不得有负荷力加在机壳上;
6. Check whether the supports of pipes, valves, mufflers and air filters are stable, and no load shall be applied to the casing;
7、检查润滑油是否良好,型号是否合适,润滑油层深度应达到规定油线以上3~5厘米,冷却水系统是否畅通;
7. Check whether the lubricating oil is in good condition, whether the model is appropriate, whether the depth of lubricating oil layer is 3~5cm above the specified oil line, and whether the cooling water system is unblocked;
8、拨动联轴器、检查叶轮转运是否灵适,有无摩擦碰撞;
8. Turn the coupling and check whether the impeller is flexible and free of friction and collision;
9、检查各部位联接是否良好,有无松动;
9. Check whether all parts are well connected and loose;
The above is a detailed introduction to Shandong Roots blower, and I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional service http://www.sddyfd.com/