气力输送料封泵工作原理：利用气流的能量，在密闭管道内沿粉体输送方向输送颗粒状物料，是流态化技术的一种具体应用。气力输送装置的结构简单，操作方便，可作水平的、垂直的或倾斜方向的输送，在输送过程中还可同时进行物料的加热、冷却、干燥和气流分级等物理操作或某些化学操作。气力输送设备与机械输送相比具有明显的降耗的优势，机械输送能量消耗较大，颗粒易受破损，设备也易受磨蚀。当物料含水量多、有粘附性或在高速运动时产生静电的物料，不宜于进行粉体输送。
Working principle of pneumatic conveying material seal pump: it is a specific application of fluidization technology to use the energy of air flow to transport granular materials along the direction of powder conveying in a closed pipeline. The pneumatic conveying device is simple in structure and easy to operate. It can be used for horizontal, vertical or inclined conveying. During the conveying process, it can also conduct physical operations such as heating, cooling, drying and air flow classification or some chemical operations. Compared with mechanical conveying, pneumatic conveying equipment has obvious advantages in energy saving and consumption reduction. Mechanical conveying consumes more energy, particles are vulnerable to damage, and equipment is vulnerable to abrasion. When the material has a lot of water content, adhesiveness or generates static electricity when moving at high speed, it is not suitable for powder conveying.
展飞气力输送料封泵的结构：
Structure of Zhanfei pneumatic conveying material seal pump:
1.槽体用厚2-4mm的钢板制造。
1. The tank is made of 2-4mm thick steel plate.
2.气力输送中空气斜槽的规格是以槽宽（B）毫米数表示，主要规格有100、150、200、250几种。
2. The specifications of air chutes in pneumatic conveying are expressed by slot width (B) mm. The main specifications are 100, 150, 200 and 250.
3.因上槽是物料和空气通路，而下槽只通空气，所以上槽较高、下槽较矮。
3. Since the upper groove is the passage for materials and air, while the lower groove is only air, the upper groove is higher and the lower groove is lower.

4.气力输送设备各段槽体用法兰连接。
4. The tank body of each section of the pneumatic conveying equipment is connected with flanges.
5.为了减小加进的物料对透气层的冲击和磨损，在透气层上盖有一层长为1.5m左右的冲孔薄钢板。
5. In order to reduce the impact and wear of the added materials on the breathable layer, the breathable layer is covered with a punched steel plate with a length of about 1.5m.
6.为了防止上下槽连接处渗入雨水，气力输送时上槽带有防水边，为了防止槽体连接处渗入雨水，设置了角钢防水盖。
6. In order to prevent rainwater from seeping into the joint of the upper and lower troughs, the upper troughs are provided with waterproof edges during pneumatic conveying. In order to prevent rainwater from seeping into the joint of the troughs, angle steel waterproof covers are provided.
在新时代技术的推动下，*技术指引着工业的迅速发展，气力输送技术也在根据时代的变换求新求变，开拓创新，巩义展飞自主*多款气力输送产品，均在市场创造了优异的成绩，尤其是我们推出的这款新技术气力输送系统，它改变了传统设备的缺点，集合了所有输送技术的优点，*的生产效率和显著的效果更加确定了我们的实力，进一步激发了我们强烈的斗志，经过长期的刻苦钻研和奋战，我们赢得了更多的发展机会，为广大用户创造了更多的效益。
Driven by the technology of the new era, * technology has guided the rapid development of industry, and pneumatic conveying technology is also seeking innovation and development according to the change of the times. Gongyi Zhanfei Environmental Protection has created outstanding achievements in the Chinese market with multiple pneumatic conveying products. In particular, this new technology pneumatic conveying system introduced by us has changed the shortcomings of traditional equipment and combined the advantages of all conveying technologies, *The production efficiency and remarkable effect have confirmed our strength and further stimulated our strong fighting spirit. After long-term hard research and fighting, we have won more development opportunities and created more benefits for the majority of users.
以上就是为大家介绍的有关江苏气力输送设备的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddyfd.com/
The above is a detailed introduction of Jiangsu pneumatic conveying equipment, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.sddyfd.com/