The rotary feeder has the advantages of simple structure, light weight, small volume, low noise, convenient installation, convenient maintenance, stable amplitude, reliable operation, stable parking, high working efficiency, large feeding amount, low power consumption, low operating cost, and has been applied in many industries. However, many customers have some misunderstandings when using this device. Here are two common misunderstandings.

1、认为料斗供料器可以代替侧给料机。与传统的固体料斗供料器相比，侧给料机拥有耐磨、螺杆扭矩高、啮合螺钉全以及传递扭矩的是金属齿轮而不是尼龙齿轮等优点。当料斗供料器作为供料器的给料侧时，仅运行三、四天就会损坏。因此，如果旋转供料器厂家说他的料斗供料器可以作为侧给料器使用，应该要求他出具相应的设备性能和使用寿命的书面保证书，以更大程度上保证我们的利益。

1. It is considered that the hopper feeder can replace the side feeder. Compared with the traditional solid hopper feeder, the side feeder has the advantages of wear resistance, high screw torque, full engagement screws, and metal gear rather than nylon gear to transmit torque. When the hopper feeder is used as the feeding side of the feeder, it will be damaged after only three or four days of operation. Therefore, if the manufacturer of the rotary feeder says that his hopper feeder can be used as a side feeder, he should be required to issue a written guarantee of the corresponding equipment performance and service life to ensure our interests to a greater extent.

2、减重补偿式供料器的精度远高于容积式供料器，与物料匹配的容积式供料器所具备的性能与重量式供料器相同，甚比不匹配的重量式供料器性能更好。减重补偿是对供料器进行控制和测试的一种机制。如果旋转供料器不能连续地将物料从进料斗转移到输送机螺杆或皮带上，在减重补偿方面就会存在一定的设计缺陷。每个重量损失补偿给料机应该都能够以体积方式操作。在评价不同的给料系统时，如果是螺旋供料器，除了用重量损失补偿控制降低系统的不稳定性外，每个供料器都应以体积的方式进行精度检查，以确定其固有精度。

2. The accuracy of the weight reducing compensating feeder is much higher than that of the volumetric feeder. The volumetric feeder matched with the material has the same performance as the weight feeder, or even better performance than the unmatched weight feeder. Weight loss compensation is a mechanism for controlling and testing the feeder. If the rotary feeder can not continuously transfer materials from the feed hopper to the conveyor screw or belt, there will be some design defects in weight loss compensation. Each weight loss compensating feeder shall be capable of operating in a volumetric manner. When evaluating different feeding systems, if it is a spiral feeder, in addition to reducing the instability of the system by weight loss compensation control, each feeder shall be checked for accuracy in the form of volume to determine its inherent accuracy.

以上就是为大家介绍的有关江西高密封旋转供料器详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务http://www.sddyfd.com/

The above is a detailed introduction of Jiangxi high seal rotary feeder for you. I hope it will be helpful to you. If you have any questions, please contact us. We will provide you with our attitude http://www.sddyfd.com/