Pneumatic conveying is also called pneumatic ash conveying and pneumatic ash removal. Its systems include negative pressure suction system and positive pressure blowing system. Changzhou Wanjia is a manufacturer specializing in the production and sales of pneumatic conveying equipment. The equipment is mainly material seal pump. It adopts a positive pressure blowing system, which belongs to a micro positive pressure (low pressure) pneumatic continuous conveying system. It has a reliability that cannot be achieved by any other pneumatic conveying system. Roots blower is generally used, and its high reliability determines the stability and reliability of the system. The main equipment of the pneumatic conveying system, the material seal pump, is simple, without frequent action of the valve in the conventional pneumatic conveying process, and the equipment failure is greatly reduced. The introduction of the whole system is checked, and the conveying pressure is stable, without any impact load. So, the question is, what are the materials that can be conveyed by such a good ash conveying system and equipment?

气力输送系统设备料封泵适合输送粉状物料、颗粒物料、松散的不粘状态的物料、粉尘物料、水泥、粉煤灰等。可输送距离的范围，从投资和生产费用来说，常州万佳为10m到500m，输送管道为全密封输送，再管道的设计上，无论是水平倾斜还是垂直都是适用的，输送的物料都可在操控室进行云距离操作，完全达到自动化操作。特别是输送含有粉末的物料时，在密封的管道输送，无粉尘、无泄漏、更没有二次污染，对健康和都有着重要意义。

Pneumatic conveying system equipment material seal pump is suitable for conveying powder materials, granular materials, loose non-stick materials, dust materials, cement, fly ash, etc. In terms of investment and production costs, the range of transportable distance is from 10m to 500m in Changzhou Wanjia. The transmission pipeline is fully sealed. In terms of pipeline design, both horizontal and vertical are applicable. The transported materials can be operated at cloud distance in the control room, fully achieving automatic operation. Especially when transporting materials containing powder, it is of great significance to health and safety to transport them in a sealed pipeline with high efficiency and environmental protection, without dust, leakage and secondary pollution.

气力输送系统、气力输送系统是典型的流体力学、工程通用、化学工程的交叉学科，要求设计者的基础理论扎实，并有较丰富的实践经验，结构尺寸及工艺参数的确定除理论计算外，更重要的是靠经验数据的积累。根据不同的工艺线，确定结构尺寸、内部配管及合理的输送管径，才能取得好的经济效益。

Pneumatic conveying system and pneumatic conveying system are typical interdisciplinary disciplines of fluid mechanics, general engineering and chemical engineering. It requires designers to have solid basic theory and rich practical experience. Besides theoretical calculation, the determination of structural dimensions and process parameters is more important to rely on the accumulation of empirical data. According to different process lines, determine the structure size, internal piping and reasonable conveying pipe diameter to achieve good economic benefits.

以上的精彩内容由江苏气力输送设备进行阅读，想要知道更多有用的知识，欢迎点击：http://www.sddyfd.com。

The above wonderful content is recommended for reading by Jiangsu Pneumatic Conveying Equipment. If you want to know more useful knowledge, please click: http://www.sddyfd.com 。