It can be used in a wide range. The application principle of pneumatic conveying equipment is very simple, and the conveying process is also simple. It can transport a wide range of operation, move flexibly and conveniently, and can supply and transport continuously. It can adapt to the transportation of various raw materials

可减少污染，洁净,气力输送系统采用封闭式输送方式，避免粉尘飞扬，能够很好的保证物料不受任何的粉尘污染，改善车间卫生条件，有利于环境保护。

It can reduce pollution, protect the environment and be clean. The pneumatic conveying system adopts closed conveying mode to avoid dust flying, which can well ensure that the materials are not polluted by any dust, improve the sanitary conditions of the workshop and be conducive to environmental protection.

可充分利用空间，占地面积小,带式输送机、螺旋输送机等输送机械实质上是朝一个方向输送，而气力输送系统可以向上、向下或围绕建筑物等障碍物输送物料，其输送管可高出或避开其他装置或设备所占用的空间

It can make full use of space and occupies a small area. Belt conveyor, screw conveyor and other conveying machinery are essentially conveying in one direction, while the pneumatic conveying system can transport materials up, down or around obstacles such as buildings, and its conveying pipe can be higher than or avoid the space occupied by other devices or equipment

可减少设备成本，维护方便,气力输送系统设备简单，运动零部件少，物料破损和设备磨损较小，即可节省能耗，维修保养也方便，易于实现自动化。

It can reduce the equipment cost and facilitate maintenance. The pneumatic conveying system has simple equipment, few moving parts, less material damage and equipment wear, which can save energy consumption, convenient maintenance and easy automation.

可实现多种工艺处理。采用气力输送系统在输送过程中或输送终端能同时进行其它工艺操作，如混合、粉碎、分级、干燥、冷却、除尘和其它化学反应，提高生产效率。

It can realize a variety of process treatment. Using pneumatic conveying system, other process operations, such as mixing, crushing, grading, drying, cooling, dust removal and other chemical reactions, can be carried out at the same time in the conveying process or at the conveying terminal, so as to improve the production efficiency.

风管的维护：风管在吸送式输送系统中指除尘器后风机进风口间以及风机出风口风帽之间的管道，一般讲,这两部分管道维修量不大，但必须注意风管连接处的密封情况，经常注意风管本体是否有锈鉵，风帽的损坏会造成雨水罐入，也应及时修补，而在压送式输送系统中风管包括了从气体压缩机排出口起直到供料器(或发送罐)的进气口，连同这中间的贮气罐、气水分离器、供气系统及相应的配管.贮气罐与气水分离器属于压力容器，应遵照压力容器的使用要求定期检查其性

Maintenance of air duct: in the suction conveying system, the air duct refers to the pipeline from the back of the dust collector to the air inlet of the fan and from the air outlet of the fan to the hood. Generally speaking, the maintenance of these two parts of the pipeline is not large, but we must pay attention to the sealing of the connection of the air duct, and often pay attention to whether there is rust on the air duct body. The damage of the hood will cause rainwater tank entry, which should also be repaired in time, In the pressure conveying system, the stroke pipe includes the air inlet from the discharge port of the gas compressor to the feeder (or sending tank), together with the air storage tank, gas-water separator, air supply system and corresponding piping The gas storage tank and gas-water separator belong to pressure vessels, and their safety shall be checked regularly according to the use requirements of pressure vessels

今日就是小编为大家带来的精彩内容，更多的精彩内容关注我们的网站：气力输送设备http://www.sddyfd.com

Today is the wonderful content that Xiaobian brings to you. More wonderful content focuses on our website: pneumatic conveying equipment http://www.sddyfd.com