Roots blower as a general-purpose equipment, in recent years, its status in China has been continuously improved. As roots blowers become more and more popular, more and more problems appear. How to prolong the service life of Roots blower has become a concern in various fields. In order to prolong the service life of Roots blower, correct use method and daily maintenance are very important.

正确的使用方法和日常保养，不仅能避免在使用过程中所出现的隐患，还能保证风机不无故罢工。如果长时间不使用罗茨鼓风机，就要切断其机体上的所有电源，把其放置在一个通风干燥的地方，这样就可以有效地避免机体在长期的不使用中而产生的生锈等现象。同时，在罗茨鼓风机的使用过程中要定期对其进行上油，只有这样才能更大限度地保证罗茨鼓风机运转的灵活性。

Correct use and daily maintenance can not only avoid potential safety hazards in the process of use, but also ensure that the fan will not strike without cause. If the roots blower is not used for a long time, it is necessary to cut off all the power on its body and place it in a ventilated and dry place, so as to effectively avoid rust and other phenomena caused by the long-term non use of the body. At the same time, the roots blower should be oiled regularly during its use, so as to ensure the flexibility of Roots blower operation to a greater extent.

此外，在平常使用的过程中还要注意以下几点：

In addition, pay attention to the following points during normal use:

1.定期对其进行检修。在罗茨鼓风机的机体上会存在较多的螺丝，这些螺丝在长期的使用过程中就会产生一定的松动，此时就需要使用人员对其进行必要的检修，及时排除隐患，以此来保证三叶罗茨鼓风机的正常使用及其使用的寿命。

1. Check and repair it regularly. There will be many screws on the body of Roots blower. These screws will loosen during long-term use. At this time, users need to carry out necessary maintenance to eliminate potential safety hazards in time, so as to ensure the normal use and service life of three leaf roots blower.

2.罗茨鼓风机上的风叶是整个机体上比较容易出现问题的部分，因此在对三叶罗茨鼓风机的使用过程中要对风叶进行定期的检查和维护，如果发现风叶出现噪音过大或者旋转异常的情况，就要及时的找人员对风机进行检修，避免因风叶的损坏而导致的整个机体的运转不灵的情况出现。

2. The fan blade on Roots blower is a part of the whole body that is prone to problems. Therefore, the fan blade should be regularly inspected and maintained during the use of three leaf roots blower. If the fan blade is found to have excessive noise or abnormal rotation, it is necessary to find professionals to repair the fan in time to avoid the poor operation of the whole body caused by the damage of the fan blade.

3.拆卸机器时应对机器各配合尺寸进行测量，做好记录，并在零部件上做好标记与方向，以保证装配且能保持原来的配合要求。

3. When disassembling the machine, measure the matching dimensions of the machine, make records, and mark and direction on the parts to ensure that the assembly can maintain the original matching requirements.

4.罗茨鼓风机的过载有时不是立刻显示出来的，所以要注意进排气压力、轴承温度和电机电的变化，借以判断机器是否运行正常。

4. The overload of Roots blower is sometimes not immediately displayed, so pay attention to the changes of inlet and exhaust pressure, bearing temperature and motor electricity, so as to judge whether the machine operates normally.

5.在正常条件情况下要求机组运行1000小时需要更换润滑油。注意润滑油冷却情况是否正常，注意润滑油的质量，经常倾听罗茨鼓风机运行有无杂声，注意机组是否在不符合规定工况下工作。

5. Under normal conditions, the unit is required to operate for 1000 hours and the lubricating oil needs to be replaced. Pay attention to whether the cooling condition of the lubricating oil is normal, pay attention to the quality of the lubricating oil, often listen to the roots blower for noise during operation, and pay attention to whether the unit works under conditions that do not meet the requirements.

只要使用过程中注意维护保养，三叶罗茨鼓风机的使用寿命会大大增强。在使用过程中，如果出现什么不明白的地方，一定要及时致电厂家寻求正确的解决方法，以免造成不必要的损耗。

As long as you pay attention to maintenance during use, the service life of the three leaf roots blower will be greatly enhanced. In the process of use, if there is anything you don't understand, you must call the manufacturer in time to find the correct solution, so as to avoid unnecessary loss.

以上就是为大家介绍的有关山东罗茨风机的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务.http://www.sddyfd.com/

The above is a detailed introduction about Shandong roots blower. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.sddyfd.com/