Working principle of aerator for aquaculture

接通电源后，风机旋转，因为叶轮有凹槽设计，会带动空气流动，所以空气通过进风口处进入泵体内，空气在里面搅动，每个凹槽经过漩涡式的增压，一道一道的循环增压而形成强大的气流能量，通过出气口排出泵体外，以供使用。

After the power is turned on, the fan rotates. Because the impeller has a groove design, it will drive the air to flow. Therefore, the air enters the pump body through the air inlet, and the air stirs in it. Each groove is pressurized in a whirlpool manner, and pressurized circularly one by one to form a strong air flow energy, which is discharged from the pump body through the air outlet for use.

水产养殖增氧鼓风机特点

Characteristics of aerator for aquaculture

1、产量提高显着。曝气式增氧机具对水体增氧效果好，不会把水体搅浑和伤及鱼苗、虾苗、蟹苗，使鱼、虾、蟹保持旺盛的代谢，成活率高。同时，由于底层增氧机管道分布均匀，可适当提高鱼、虾、蟹的养殖密度。 2、发生气泡小，分布均匀溶解氧气量大，特别对水体底部增氧效果明显。曝气管在水底部产生“V”型雾化气泡流，在水深2米时，雾化气泡宽度可达3-4米。盘式曝气增氧设备在水底产生漩涡雾化气泡流，一个直径1.2米的盘式曝气增氧设备增氧面积可达350

1. The output increased significantly. The aerated aerator has good oxygenation effect on the water body. It will not muddy the water body and damage the fish fry, shrimp fry and crab fry, so that the fish, shrimp and crab can maintain vigorous metabolism and high survival rate. At the same time, because the bottom aerator pipes are evenly distributed, the breeding density of fish, shrimp and crab can be appropriately increased. 2. Small bubbles, uniform distribution and large amount of dissolved oxygen, especially for the bottom of the water body. The aeration pipe generates a "V" shaped atomized bubble flow at the bottom of the water. When the water depth is 2 meters, the atomized bubble width can reach 3-4 meters. The disc aerator generates vortex atomized bubble flow at the bottom of the water. The oxygenation area of a disc aerator with a diameter of 1.2m can reach 350 square meters

高压曝气风机主要用途

Main uses of high pressure aeration fan

1、工业搅拌曝气、清洗曝气、水处理鼓风曝气、水产养殖曝气、增氧、河道治理曝气等；

1. Industrial mixing aeration, cleaning aeration, water treatment blast aeration, aquaculture aeration, oxygenation, river treatment aeration, etc;

2、医院、实验室的污水搅拌曝气；

2. Sewage mixing and aeration in hospitals and laboratories;

3、印刷行业的真空送纸。

3. Vacuum paper feeding in printing industry.

4、电镀槽、工业废水的搅拌曝气；

4. Agitation and aeration of electroplating tank and industrial wastewater;

5、塑焊、吹风的气源供应；

5. Air supply for plastic welding and blowing;

6、燃烧器的喷雾、玻璃工业；

6. Spray and glass industry of burners;

7、水产养殖；

7. Aquaculture;

8、物料、生物、生化池等发酵曝气；

8. Fermentation aeration of material, biological and biochemical tanks;

9、需要气源的其他设备。

9. Other equipment requiring air supply.

本文的精彩内容由湖北水产增氧设备提供知识提供，本网站还有很多的精彩内容，更多的内容您可以点击进入：http://www.sddyfd.com/我们有专门的客服为您解答问题

The wonderful content of this article is provided by Hubei aquatic oxygenation equipment. There are many wonderful content on this website. You can click to enter more content: http://www.sddyfd.com/ We have special customer service to answer your questions